

EXATON 19.12.3.L
19.12.3.L is used for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, used for service temperatures up to 400°C (750°F). It is also used for Cr steels with max. 19% Cr. It is used for MIG/MAG welding.


EXATON 19.12.3.L CRYO
19.12.3.L CRYO is a filler material for joining austenitic stainless steels, e.g. ASTM 316, 316L, as well as 304, 304L, for cryogenic applications and meets the requirements of ASME Section VIII, Division 1, UHA 51 ((a) (4) (-a) (-1)) and others. It is used for service temperatures down to -269ºC (-452ºF), and ferritic or martensitic stainless steels, with maximum 19% Cr. It is used for MIG/MAG welding. The grade has been specifically developed for welding in cryogenic applications, typically: manufacturing of dewars, containers, tanks, cryostats, and transfer systems for transportation and storage of LNG, LPG, liquid nitrogen and liquid helium. The chemical composition is optimized for cryogenic applications in terms of impact strength and other characteristics. It has controlled chemical composition and ferrite content for resistance to microfissuring, and balanced minor additions of certain elements for optimum arc stability and wetting characteristics. Impurity levels are lower in the consumable in order to reduce the risk of hot cracking and to obtain the best arc stability, fluidity, low spatter and wetting properties.


EXATON 19.12.3.LSI
Exaton 19.12.3.LSi is used for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, for service temperatures up to 400°C (750°F). It is also used for welding of stainless Cr-steels with max 19% Cr.


EXATON 19.12.3.LSIMO
Exaton 19.12.3.LSiMo is used for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, for service temperatures up to 400°C (750°F). It is also used for welding of stainless Cr-steels with max 19% Cr. Exaton 19.12.3.LSiMo is particularly suited for GMAW, but can also be used for automated GTAW and plasma welding. The critical pitting temperature, CPT, according to ASTM G150 (1°C of accuracy) can be as high as 39°C compared to standard 316LSi, which achieved maximum 29°C during the benchmark. The results were achieved with GMAW, but are expected to be on the same level or better for GTAW.


EXATON 19.13.4.L
19.13.4.L is suitable for joining stainless CrNiMo steels e.g. 317L or similar. It is used for MIG/MAG welding.


EXATON 19.9.L
19.9.L is used for MIG/MAG welding, and is suitable for joining stainless steels of the 18Cr/8Ni/ELC and 18Cr/8Ni/Nb types for service temperatures up to 350°C (660 F). 19.9.L can be used at cryogenic temperatures down to 4°K (-269°C).


EXATON 19.9.LSI
19.9.LSi is a filler metal particularly suited for MIG/MAG welding. It is suitable for joining stainless steels of the 18Cr/8Ni ELC-type and 18Cr/8Ni/Nb type for service temperatures up to 350°C (660°F).


EXATON 19.9.NB
Filler metal 19.9.Nb is suitable for joining stainless steels of the 18Cr/8Ni/Nb and 18Cr/8Ni/Ti types. Due to the strenghtening effect of niobium, this grade is recommended if the weld metal will be exposed to temperatures above 400°C (750°F). It is used for MIG/MAG welding.


EXATON 22.12.HT
Exaton 22.12.HT is an austenitic filler material for welding the high temperature steel grade Sandvik 253 MA*, UNS S30815. It is characterized by high creep strength, good resistance to oxidation and good weldability. It is used for MIG/MAG welding.


EXATON 22.15.3.L
22.15.3.L is an austenitic filler material for joining stainless steels to carbon steels or low-alloy steels and for overlay welding. It is used for MIG/MAG welding.


EXATON 22.8.3.L
Exaton 22.8.3.L is used for welding of duplex stainless steels such as Sandvik SAF 2205 and SAF 2304. It can also be used for welding of duplex stainless steels to carbon steel. It can be used for plasma welding and overlay welding using hot wire TIG and mechanical TIG.


EXATON 22.8.3.LSI
Exaton 22.8.3.LSi is designed for gas shielded arc welding of duplex stainless steels, such as Sandvik SAF 2205 and Sandvik SAF 2304. Its corrosion resistance is equal to ASTM 904L in most applications. It combines high strength with excellent ductility. Exaton 22.8.3.LSi can also be used for joining Sandvik SAF 2205 or Sandvik SAF 2304 to carbon steel or low-alloy steels. It can be used for plasma welding and overlay welding using hot wire TIG and mechanical TIG.


EXATON 24.13.L
24.13.L is suitable for joining stainless Cr-Ni steels of the 309 type, Cr-steels and dissimilar steels e.g. austenitic stainless steel to carbon or low-alloyed steels for service up to 320°C (610°F). It is used for MIG/MAG welding. Widely used as barrier layer between carbon/low alloy steel and different stainless grades in cladding operations.


EXATON 24.13.LHF
24.13.LHF welding wire is used for MIG/MAG welding. It is particularly suitable for overlay welding and joining dissimilar steels, for example austenitic stainless steels to low alloyed or non alloyed steels. It has excellent resistance to hot cracking due to its enhanced ferrite content.


EXATON 24.13.LNB
24.13.LNb is a niobium-stabilized overalloyed filler metal suitable for overlay welding of carbon and low alloy steels, where a type 347 of overlay is required in one layer. Typical applications is cladding of shells and inlets of hydrocrackers, which has a service temperature of 600-650°C. It is used for MIG/MAG welding as well as for overlay welding using hot wire TIG and mechanical TIG.


EXATON 24.13.LSI
24.13.LSi is suitable for joining stainless chromium-nickel steels of the ASTM 309 type, chromium steels and dissimilar metals e.g. austemitic stainless steel to carbon or low-alloyed steel. It is used for MIG/MAG welding.


EXATON 19.12.3.L
19.12.3.L is used for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, used for service temperatures up to 400°C (750°F). It is also used for Cr steels with max. 19% Cr. It is used for MIG/MAG welding.


EXATON 19.12.3.L CRYO
19.12.3.L CRYO is a filler material for joining austenitic stainless steels, e.g. ASTM 316, 316L, as well as 304, 304L, for cryogenic applications and meets the requirements of ASME Section VIII, Division 1, UHA 51 ((a) (4) (-a) (-1)) and others. It is used for service temperatures down to -269ºC (-452ºF), and ferritic or martensitic stainless steels, with maximum 19% Cr. It is used for MIG/MAG welding. The grade has been specifically developed for welding in cryogenic applications, typically: manufacturing of dewars, containers, tanks, cryostats, and transfer systems for transportation and storage of LNG, LPG, liquid nitrogen and liquid helium. The chemical composition is optimized for cryogenic applications in terms of impact strength and other characteristics. It has controlled chemical composition and ferrite content for resistance to microfissuring, and balanced minor additions of certain elements for optimum arc stability and wetting characteristics. Impurity levels are lower in the consumable in order to reduce the risk of hot cracking and to obtain the best arc stability, fluidity, low spatter and wetting properties.


EXATON 19.12.3.LSI
Exaton 19.12.3.LSi is used for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, for service temperatures up to 400°C (750°F). It is also used for welding of stainless Cr-steels with max 19% Cr.


EXATON 19.12.3.LSIMO
Exaton 19.12.3.LSiMo is used for welding of austenitic stainless alloys of 18% Cr – 8% Ni and 18% Cr – 10% Ni – 3% Mo-types, stabilized or non-stabilized, e.g. ASTM 316, 316L and 316Ti as well as 304, 304L, 321 and 347, for service temperatures up to 400°C (750°F). It is also used for welding of stainless Cr-steels with max 19% Cr. Exaton 19.12.3.LSiMo is particularly suited for GMAW, but can also be used for automated GTAW and plasma welding. The critical pitting temperature, CPT, according to ASTM G150 (1°C of accuracy) can be as high as 39°C compared to standard 316LSi, which achieved maximum 29°C during the benchmark. The results were achieved with GMAW, but are expected to be on the same level or better for GTAW.


EXATON 19.13.4.L
19.13.4.L is suitable for joining stainless CrNiMo steels e.g. 317L or similar. It is used for MIG/MAG welding.


EXATON 19.9.L
19.9.L is used for MIG/MAG welding, and is suitable for joining stainless steels of the 18Cr/8Ni/ELC and 18Cr/8Ni/Nb types for service temperatures up to 350°C (660 F). 19.9.L can be used at cryogenic temperatures down to 4°K (-269°C).


EXATON 19.9.LSI
19.9.LSi is a filler metal particularly suited for MIG/MAG welding. It is suitable for joining stainless steels of the 18Cr/8Ni ELC-type and 18Cr/8Ni/Nb type for service temperatures up to 350°C (660°F).


EXATON 19.9.NB
Filler metal 19.9.Nb is suitable for joining stainless steels of the 18Cr/8Ni/Nb and 18Cr/8Ni/Ti types. Due to the strenghtening effect of niobium, this grade is recommended if the weld metal will be exposed to temperatures above 400°C (750°F). It is used for MIG/MAG welding.


EXATON 22.12.HT
Exaton 22.12.HT is an austenitic filler material for welding the high temperature steel grade Sandvik 253 MA*, UNS S30815. It is characterized by high creep strength, good resistance to oxidation and good weldability. It is used for MIG/MAG welding.


EXATON 22.15.3.L
22.15.3.L is an austenitic filler material for joining stainless steels to carbon steels or low-alloy steels and for overlay welding. It is used for MIG/MAG welding.


EXATON 22.8.3.L
Exaton 22.8.3.L is used for welding of duplex stainless steels such as Sandvik SAF 2205 and SAF 2304. It can also be used for welding of duplex stainless steels to carbon steel. It can be used for plasma welding and overlay welding using hot wire TIG and mechanical TIG.


EXATON 22.8.3.LSI
Exaton 22.8.3.LSi is designed for gas shielded arc welding of duplex stainless steels, such as Sandvik SAF 2205 and Sandvik SAF 2304. Its corrosion resistance is equal to ASTM 904L in most applications. It combines high strength with excellent ductility. Exaton 22.8.3.LSi can also be used for joining Sandvik SAF 2205 or Sandvik SAF 2304 to carbon steel or low-alloy steels. It can be used for plasma welding and overlay welding using hot wire TIG and mechanical TIG.


EXATON 24.13.L
24.13.L is suitable for joining stainless Cr-Ni steels of the 309 type, Cr-steels and dissimilar steels e.g. austenitic stainless steel to carbon or low-alloyed steels for service up to 320°C (610°F). It is used for MIG/MAG welding. Widely used as barrier layer between carbon/low alloy steel and different stainless grades in cladding operations.


EXATON 24.13.LHF
24.13.LHF welding wire is used for MIG/MAG welding. It is particularly suitable for overlay welding and joining dissimilar steels, for example austenitic stainless steels to low alloyed or non alloyed steels. It has excellent resistance to hot cracking due to its enhanced ferrite content.


EXATON 24.13.LNB
24.13.LNb is a niobium-stabilized overalloyed filler metal suitable for overlay welding of carbon and low alloy steels, where a type 347 of overlay is required in one layer. Typical applications is cladding of shells and inlets of hydrocrackers, which has a service temperature of 600-650°C. It is used for MIG/MAG welding as well as for overlay welding using hot wire TIG and mechanical TIG.


EXATON 24.13.LSI
24.13.LSi is suitable for joining stainless chromium-nickel steels of the ASTM 309 type, chromium steels and dissimilar metals e.g. austemitic stainless steel to carbon or low-alloyed steel. It is used for MIG/MAG welding.